Main features
- Two scan modes selectable: AC filter & Non AC filter
- Detect AC voltage presence (50V-1000V).
- Test physical status for STP, UTP lan cable.
- Measure cable length accurately , the range is 200m.
- Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch.
- PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard)
Transmitter Wiremap Cable type CAT5、CAT6 (STP & UTP)
Test with switch directly Yes
Max range 600m
Length Cable type CAT5、CAT6 (STP & UTP)
Test range 2~200m
Accuracy ±1.6m
Breakage location Yes
Scan Cable type CAT5、CAT6 (STP & UTP)
Max. signal voltage 8Vp-p
Frequency 130KHz
AC filter Yes
Max range 600m
POE Test range DC 5~60V standard / non-standard PoE switch
Voltage display Yes
PSE type IEEE 802.3af/at
LCD display 128*64 Dot-matrix with backlight
Power supply AAA*3 (Not included)
Low battary warning 2.7V
Auto-off time 15min、30min、60min、OFF
Voltage protection DC48V 5mA
Max working current <150mA
Receiver Sentivity adjustable Yes
AC Voltage detecting Yes
Lamp Yes
Battary type 9V*1 (Not included)
Low battary warning 6± 0.5V
Max working current <100mA
Remote Wiremap Port RJ45
Voltage protection DC48V 5mA