The NF-488 PoE Checker is consists of two parts: an Emitter and a remote. It has functions such as standard and non-standard PoE equipment detection, PoE power online test, network cable continuity test, DC power test, switch loop-back test and other functions. Therefore, it is a practical tool for installation and maintenance of technical personnel in security monitoring, communication wires, integrated wiring and other weak current systems.
CONTACT US
Main Functions
· Test the information of the standard PoE device, such as af\at standard,power supply voltage, power supply polarity and mode.
· Identify the supply voltage, power supply polarity and mode of non-standard PoE devices.
· Check the short circuit, crossover and open circuit status in the network cable.
· Test the current, voltage and power consumed by DC appliances.
. The loop-back test function of the switch.
NF-488 Transmitter specification | ||
Indictor | LCD 128x64 mm, with back light | |
Continulity function | Cable types | CAT5,CAT6 |
Check UTP/STP cable | YES | |
Cable short indicate | YES | |
Max testing range | 600m | |
Wire mapping | Emitter +Remote | |
Emitter + switch/routor | ||
PoE function | Test range | DC5-60V POE switch |
Standard identify | 802.3af/at ( standard/non-standard) | |
Test range power | 0-18W | |
Output interface | YES | |
Power function | Voltage test range | DC0-60V |
Current test range | 0-3A | |
power test range | 0-180W | |
Input voltage protection | DC48V 5mA | |
Max working current | ≤80mA | |
Loopback | Compatible with 10M ,100M,1000M switch | |
Power supply | 3*AAA | |
NF-488 Remote Specification | ||
Ports | RJ45 | |
Function | Wire mapping for network cable | |
Input voltage protection | DC48V 5mA |
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.