Tone generator probe kit NF-806
Overview
The underground wire locator is designed to allow the user to track low voltage cables, also can trace metal cables.
The system uses a“transmitter" to send a signal down the cable being traced or to a solenoid valve that is being located.
A "receiver”is then used to pick up the signal and follow the cable or locate the coil.
Tone generator probe kit NF-806
Main features:
1. [Cable track] Locate cable quickly among lots of unknown cables;
2. [Cable continuity] Verify Lan cable (open,short, cross) ;
3. [Pin-to-pin] Pin to pin cable map for indiviual cable (not by pairs) ;
4. [Direct cable lead] clips are connected with transmitter directly;
5. [Certificates approved] CE/FCC approved;
Specification:
NF-806R Transmitter specifications | |||
Tone frequency | 1KHz | ||
Max. distance of transmission | Up to 2 kilometers | ||
Max. working current | Less than 10mA | ||
Volume Regulate Function | Audio volume level control | ||
Tone mode | 2 Tones, adjustable | ||
Compatible connectors | RJ45, cable clip with RJ11 connector | ||
Max. signal voltage | 8Vp-p | ||
LED lights display | Wiremap, tone, tracing | ||
Battery Type | DC9.0V(NEDA 1604/6F22) x 1pc | ||
Dimensions (LxWxD) | 15 x 3.7 x 2cm | ||
NF-806R Receiver specifications | |||
Frequency | 1KHz | ||
The Max. working current | Less than 30mA | ||
Earphone jack | 1 | ||
Battery Type | DC9.0V(NEDA 1604/6F22) x1pc | ||
Dimensions (LxWxD) | 12.2 x 4.5 x 2.3cm |
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.