NF-806 is a very reliable cable tracker among the whole product range from Noyafa and also the same functioned products in the market.
Designed with cable continuity testing, cable breakage / open / short / cross diagnose functions with alligator clips makes NF-806 much popular for it's excellent performance in cable testing, cable tracing etc field for cable engineers.
Product Specification:
Item | Specification | |
Product Name | Wire Tracker | |
Power Supply | DC 9V Battery | |
The Max Working Current(MA) | Emitter | 10 mA |
Receiver | 30 mA | |
Signal transmission format | Multiple Frequency Impulse | |
Signal output electric status | 8Vp-p | |
Distance of signal trans mission | 2KM | |
Appearance dimension | Emitter | 126 X 49 X 34 mm |
Receiver | 175 X 42 X 27 mm | |
Whole device | 270 X 165 X 45 mm | |
Weight Details | Emitter | 0.060 kg |
Receiver | 0.072 kg | |
Whole device | 0.420 k |
Packaging details:
Emitter | 1pc | RJ45 adaptor cable | 1pc |
Receiver | 1pc | Instruction manual | 1pc |
9V Battery | 2pcs | Toolkit | 1pc |
Earphone | 1pc | Color box | 1pc |
RJ 11 telephone cable tracing instruction:
1.Directly insert telephone wire with RJ11 plug into the RJ11 socket of emitter; (Note: Never put energized telephone cable into RJ45 port, in fear of burnout to the tester)
2. Push DIP switch of emitter to position of “SCAN " then wire finding indicator “STATUS " flashes, which means the emitter works normally;
3. Press the inching button, use the probe of receiver to find target wire at the other end;
4. During testing, function switchover button can be pressed for switchover of dual-tone.
RJ 45 Network cable tracing instruction:
1.Directly insert telephone wire with RJ45 plug into the RJ45 socket of emitter;
2. Push DIP switch of emitter to position of “SCAN " then wire finding indicator “STATUS " flashes, which means the emitter works normally;
3. Press the inching button, use the probe of receiver to find target wire at the other end;
4. During testing, function switchover button can be pressed for switchover of dual-tone.
Network Collation function:
1. Insert the two ends of the network cable into the Rj45 ports of emitter and receiver.
2. Push function switchover button on emitter to the position of "TEST " , testing indicator "VERIFY" flashes meaning normal work of emitter.
3. Accord ing to 18 indicators, judge the characteristics of short-circuit, breaking circuit, open circuit and crossing.
4. During testing, function switchover button can be pressed for switchover of fast and slow levels.
Open / Short circuit testing function:
Please turn the button to the "TEST" position and press the "SWITCH" button for 2 seconds of the Emitter, then the "VERIFY " keep lighting and clamp the clips to the Mo side of the wire. If the condition is short, the "STATUS" light of the emitter will turns red. The impedance of the wire can be showed by the degree of status light, the more bright light the less impedance.
Polarity testing function:
Push DIP switch on emitter to position of "SCAN" , press function switchover button on emitter for 2 seconds, "STATUS" indicator will turn off and "VERIFY" indicator flashes, insert the crystal plug of crocodile clamp into RJ11, clamp the Mo ends of cable with crocodile clamps, in case that " STATUS” indicator lights up in red, it means the end clamped by red clamp is positive pole, in case that "STATUS" indicator lights up in green, it means the end clamped by red clamp is negative pole.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.