NF-8209 uses dual-mode line hunting, divided into normal mode and anti-interference mode.
It can accurately measure the length and breakpoint of the network cable (range 3-200 meters).
It has the port flashing function and the voltage detector function, and can test the power supply parameters of the POE port.
Main features | |||
1. Two scan modes selectable: AC filter & Non AC filter | |||
2. Detect AC voltage presence (50V-1000V). | |||
3. Test physical status for STP, UTP lan cable. | |||
4. Measure cable length accurately , the range is 200m. | |||
5. Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch. | |||
6. PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard) | |||
Specification | |||
Transmitter | Wiremap | Cable type | CAT5、CAT6 (STP & UTP) |
Test with switch directly | Yes | ||
Max range | 600m | ||
Length | Cable type | CAT5、CAT6 (STP & UTP) | |
Test range | 2~200m | ||
Accuracy | ±1.6m | ||
Breakage location | Yes | ||
Scan | Cable type | CAT5、CAT6 (STP & UTP) | |
Max. signal voltage | 8Vp-p | ||
Frequency | 130KHz | ||
AC filter | Yes | ||
Max range | 600m | ||
POE | Test range | DC 5~60V standard / non-standard PoE switch | |
Voltage display | Yes | ||
PSE type | IEEE 802.3af/at | ||
LCD display | 128*64 Dot-matrix with backlight | ||
Power supply | AAA*3 (Not included) | ||
Low battary warning | 2.7V | ||
Auto-off time | 15min、30min、60min、OFF | ||
Voltage protection | DC48V 5mA | ||
Max working current | <150mA | ||
Receiver | Sentivity adjustable | Yes | |
AC Voltage detecting | Yes | ||
Lamp | Yes | ||
Battary type | 9V*1 (Not included) | ||
Low battary warning | 6± 0.5V | ||
Max working current | <100mA | ||
Remote | Wiremap Port | RJ45 | |
Voltage protection | DC48V 5mA |
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.