NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Language
NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Author: Noyafa–Cable Tester Manufacturer
What should I do if the cable barbed device is accidentally pressed when the power is turned on? For many years, the cable barbed device has been barbed by the cable barber in accordance with the requirements of industry standards. The cable will cause the cable piercer to be mis-pressed when the power is turned on. For many years, the cable piercer has been pierced by the cable piercing department in accordance with the requirements of the industry standard, using manual piercing. Once the cable is identified incorrectly, Accidentally stabbed live cables will cause great harm. The electronic control ensures that even if the power of the cable piercer is turned on and a certain key of the remote control is pressed by mistake, the device will not operate. And when the power switch is not turned on, the cable piercer is impossible to operate.
When the cable piercer is in the upper boring state (the upper boring light is on), the nail tube extends out of the connecting sleeve and does not completely press back into the connecting sleeve, and the device cannot move. The cable piercing device requires that it must be wiped and maintained after each trial piercing, so as to avoid rust and affect the use when it is not used for a long time. During maintenance, please disassemble and assemble according to the above assembly diagram, and“nail tube”“brake ring”“piston body”Wipe the moving parts carefully with cotton cloth (yarn) to remove the formed particles, and then apply lubricating oil (ordinary lubricating oil) to prevent the parts from rusting due to the influence of gas, which affects the service life and life.
The cable piercing device solves the identification of high-voltage cables on site, the identification of whether the cable is live or not, and the safe piercing problem, and eliminates potential safety hazards. The cable stabbing device is safe for stabbing, and is only suitable for hard surface operations (cables, cement floors, etc.); it has multiple mechanical and electronic protection designs, which are safe and reliable; the cable stabbing device has beautiful appearance, portable design, built-in lithium-ion rechargeable battery, Charger, suitable for outdoor use without power supply. The cable barbed device provides users with a known start and terminal, but the construction site, like a cable trench, cannot identify which cable is the problem.
In order to ensure the safety, the matching use of the cable stabbing device completely solves the identification of high-voltage cables on site, the identification of whether the cable is live or not, and the problem of safe stabbing, and eliminates potential safety hazards.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.