Cable fault tester function What auxiliary functions does the cable fault tester have? With the development of technology and the needs of production, the functionality of the cable fault tester is becoming more and more comprehensive. It can no longer meet the application requirements of the cable fault tester. Automatic adjustment, dynamic and static functions, and self-checking functions can help us to use it more conveniently. 1. Automatic gain adjustment of the receiver: automatically adjust the gain of the receiver to make the receiver in an optimized state, eliminating the cumbersome manual adjustment 2. Dynamic and static functions: the receiver can intuitively reflect the signal size measured by the cable fault tester through the tone change 3. Pipeline condition detection: When the transmitter is in the injection mode, it first detects the insulation resistance and residual voltage of the pipeline, and then applies the signal to the target pipeline. When the insulation resistance on the pipeline is small (near short-circuit to ground), the transmitter will automatically exit this mode. When the residual voltage is large, the transmitter will give an alarm, and the operator should immediately stop the signal loading and turn off the transmitter.
4. Battery power detection: real-time detection of battery power, when the power is low to the maintenance value, an alarm will be sent to automatically shut down the cable fault tester using advanced signal processing technology, a variety of signal transmission methods to meet our various needs, and various This auxiliary function optimizes and simplifies our operation and makes the work more organized. What auxiliary functions does the cable fault tester have? The function of the cable fault tester is Shenzhen Noyafa Electronic Technology Co., Ltd.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.