NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Language
NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Author: Noyafa–Cable Tester Manufacturer
Question: What are the operating instructions for the cable piercing device? Answer: The cable piercing device has double guns and double angles to pierce the cable under test, which is an exclusive and innovative cable piercing device. Greatly improves the safety performance and ease of use of cable testing. It has the question: What are the operation instructions for the cable piercing device? Answer: The cable piercing device has double guns and double angles to pierce the tested cable, which is an exclusive and innovative cable piercing device.
Greatly improves the safety performance and ease of use of cable testing. It has one experiment: two angles and two punctures are completed at the same time, and it is an essential tool for cable construction and maintenance workers. The following editor will answer the instructions for the piercing operation of the cable piercing device: 1. Turn on the power switch of the device, then“Up boring”The status indicator should be on 2. Keep away from the device ≧ 2 meters 3. Press the two keys (A key and D key) of the remote control at the same time, the device will accept the remote control command and automatically try to tie, when the test is successful“try tie”lights flashing like“try tie”If the light does not flash, press the above two keys again until“try tie”When the light flashes and the sound of bullet explosion is heard, the trial is completed.
After completion, the device will automatically work to“Up boring”The light is on, ready for the next boring work. 4. After the trial tie is completed, it should be confirmed that the cable to be tied is not charged, and then the device can be removed, and finally the ground wire can be removed. 5. Push the piston rod in the nail tube back into the bottom of the barrel with the provided pass bar, pull out the loading clip as shown in the figure, pull the cartridge case out of the bore, and wipe and maintain the device for reuse.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.