Author: Noyafa–Cable Tester Manufacturer
Question: What are the answers to the instrument inspection of the cable stabbing device: The cable stabbing device is an intelligent instrument, which can quickly and accurately detect the location and size of the damaged point of the anti-corrosion layer of the underground pipeline without destroying the ground covering. It is widely used in various questions: What are the answers to the instrument inspection of the cable piercer: The cable piercer is an intelligent instrument, which can quickly and accurately detect the damage point of the anti-corrosion layer of the underground pipeline without destroying the ground covering. location and size, are widely used in various industries. So, do you know how to check and repair when the cable piercer fails? Let me explain it to you in detail below. When there is a problem with the cable piercing device, you can start from the following aspects: 1. Check the transmitter.
Turn on the transmitter and observe the lighting condition of the battery power indicator in the display. If the battery voltage indication is lower than 11V, it needs to be fully charged before use. 2. Receiver inspection. Press the power button to check the battery level.
If the battery is fully charged, all five solid lines of the battery symbol will be displayed on the display. When only one solid line of the battery symbol is lit, the battery symbol will flash, indicating that the battery is insufficient and needs to be fully charged before use. 3. Deep functional inspection. Choose an area without metal structures and other pipelines to be probed, place an insulated cable or wire greater than 20 meters on the ground, connect the far end to a ground rod or directly ground, and connect the near end to the red wire of the output line, the black wire wire to ground, and plug the output wire into the transmitter's output jack.
4. Refer to the volume setting. The set value is permanently saved. If you need to reset it, you need to press and hold the volume key to turn on the power and enter the setting state to complete the setting of the new reference volume.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.