Author: Noyafa–CCTV Tester
What are the characteristics of the cable fault tester? With the development of today's society, technology has facilitated various fields of people's lives. From travel to life and rest; water, gas, electricity and other fields have become safe and convenient. Among them, what are the characteristics of the cable fault tester for communication and power-on? With the development of today's society, technology is convenient for various fields of people's lives.
From travel to life and rest; water, gas, electricity and other fields have become safe and convenient. Among them, the channel for communication and power-on“Cable”, From material to installation, from overhead to underground, it has done very well. But for cables with such distance and arrangement, if there is a problem, it will be very difficult to judge the position and repair it. Then, the cable fault tester does play a very important role in this regard.
What kind of characteristics does the tester have, which makes it widely used in the detection of faulty cables. 1. The cable fault tester has complete functions, testing faults accurately, quickly and safely. The tester adopts the low-voltage pulse method and the high-voltage flashover method for detection, which can detect various faults in the cable.
2. The cable fault test instrument adopts high-speed data sampling technology, which can prepare the position of the test fault point. 3. The cable fault tester has the function of parameter storage and recall. Using non-volatile equipment, data is not easy to lose after the instrument is turned off.
4. The cable fault tester has dual trace display function. The test waveforms of the cables can be compared, which is conducive to further judgment of the fault. 5. The cable fault tester has the function of controlling the measurement cursor.
It can automatically search along the line and automatically stop at the fault waveform to confirm the exact position. 6. The cable fault tester has a distance display function. The fault point and the distance between the detection points can be automatically detected.
7. The cable fault tester has a printing function. The test results can be printed and written for easy reading and reporting after the test is completed. 8. The cable fault tester is equipped with menu display operation, and the operation and use of the instrument can be completed without special training.
The cable fault tester is a set of instruments that integrate various intelligent functions to accurately test cable faults. All of the above intelligent features make it safer, faster and more accurate in the process of using the test cable. The huge economic losses caused by unexpected cable failures can be minimized.
Requirements for operators also.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.