There are two working modes of the underground pipeline detector field source

2022/06/07

Author: Noyafa–CCTV Monitor Tester

Underground Pipeline Detector Underground Pipeline Detector Field Source has two working modes. Underground pipeline detector passive source working mode is used to search for unknown power cables or underground pipes with cathodic protection signals applied in an area and metals that can sense radio frequencies. Pipeline, active source working mode is used to track and locate pipeline signals in the area. 1. The passive source power frequency method does not require a transmitter, it can search for power cables in an unknown area. Turn on the receiver, select the working frequency of the receiver as 50Hz, adjust the gain to get a suitable reading and select the maximum value method or the minimum value method to search back and forth in an area by grid search.

Carry the receiver and walk smoothly, so that the fuselage surface is in a straight line with the moving direction and at right angles to the passing pipeline as much as possible. Do not swing in an arc, because this will produce some misleading signals. When the response of the receiver shows abnormality, stop immediately, accurately locate the position of the pipeline and make a mark. A pipeline passing through the search area also needs to be tracked and marked.

Underground pipeline detector 2. The passive source cathodic protection current (CPS) signal method does not require a transmitter, it can search for underground metal pipelines with impressed current cathodic protection in an unknown area. Turn on the receiver, select the receiver working frequency as CPS, the usage method is the same as the power frequency method. 3. Radio frequency detection mode: The radio frequency detection mode is mainly used in the detection of metal pipelines that can sense radio frequencies.

Shenzhen Noyafa Electronic Technology Co., Ltd. is a high-tech enterprise engaged in scientific research, production and sales, and provides technical services for cable fault detection. At present, a variety of high-voltage test equipment and testing instruments have been widely used in the industry. At the same time, our company provides technical services such as cable fault detection and substation testing and testing to users across the country. The core engineer responsible for providing technical services has 20 years of on-site testing. Experience, can provide solutions according to different types of cables and site environment. The underground pipeline detector field source has two working modes. The underground pipeline detector Shenzhen Noyafa Electronic Technology Co., Ltd.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
English
Magyar
Ελληνικά
한국어
Türkçe
русский
italiano
Español
Português
Polski
français
Deutsch
日本語
Nederlands
Tiếng Việt
ภาษาไทย
Latin
العربية
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
norsk
Chicheŵa
ਪੰਜਾਬੀ
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
Pilipino
Українська
اردو
O'zbek
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English