NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Language
NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Author: Noyafa–POE Tester
Pipeline Detector Manufacturer's Underground Integrated Pipeline Detector Usage and Operation Steps Pipeline Detector Manufacturer Pipeline Detector can accurately locate and measure the depth of underground pipes, cables and optical cables without excavation. With super anti-interference ability, accurate positioning and detection functions, it is suitable for detection and inspection of various underground metal pipelines, pipeline management and maintenance, municipal planning and construction, power supply and other departments. It is one of the necessary instruments for pipeline maintenance units. . Components of pipeline inspection instrument: transmitter, receiver, connecting wire, fixture, strong magnet, file, ground rod, transmitter charger, receiver charger; warranty card, instruction manual, accessories list.
Direct connection method of pipeline detector: 1. Connect the connecting wire connector to the transmitter, connect the red alligator clip to the strong magnetic field, and connect the strong magnetic field to the pipe; connect the black alligator clip to the ground rod. 2.
Turn on the transmitter, press the f key to adjust the transmission frequency to 512hz, and adjust the gain to 5 files. The transmitter should be placed parallel above the pipe. 3.
Turn on the receiver and adjust the frequency to 512hz corresponding to the transmitter. 4. Select the peak arrow mode as the detection mode, long press the + button to adjust the sensitivity to an appropriate size, the handheld receiver is perpendicular to the transmitter, and move left and right to detect; the place with the greatest response is the position of the target pipeline.
Press the I key directly above the pipe to measure the depth. Left and right movement detection pipeline detector clamping method: 1. Connect the clamp cable to the transmitter and snap it over the target cable.
2. Turn on the transmitter, the instrument will automatically select 33khz and adjust the gain to 5th gear. The transmitter should be placed parallel above the cable.
3. Turn on the receiver and adjust the frequency to 33khz corresponding to the transmitter. Press the I key directly above the pipeline to measure the depth of the underground integrated pipeline detector using methods and operating steps. The pipeline detector manufacturer Shenzhen Noyafa Electronic Technology Co., Ltd.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.