NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Language
NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Author: Noyafa–Cable Length Tester
Cable fault test use steps of cable fault tester Cable fault test use The detection of cable fault tester generally includes three steps of diagnosis, distance measurement and fixed point. 1. Cable fault diagnosis method.
The diagnosis of the nature of the cable fault is to determine the type and severity of the fault, so that the tester can prescribe the right medicine and choose the appropriate cable fault location and fixed-point method. 2. Cable fault location Cable fault location (also known as rough measurement) uses an instrument at one end of the cable to determine the distance to the fault.
Common fault location methods in the field include the classic bridge method and the modern traveling wave method. Mainly use cable fault locator. 3.
Cable fault location, also known as precise measurement, is to find out the approximate direction of the fault point according to the fault location result and the path direction of the cable. On a very small scale, use a high voltage signal generator, use discharge acoustic measurements or other methods to determine the exact location of the fault point. I hope the cable fault detector introduced above can bring you some help.
Thanks for reading. Please contact us if required. Cable fault tester use steps Cable fault test purpose Shenzhen Noyafa Electronic Technology Co., Ltd.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.