Author: Noyafa–Cable Tester Manufacturer
Electronic distance meter fault The PLC input signal cannot be normal when the cable fault point is detected. The electronic distance meter is faulty. Or when set up, the gear trader in order to land“share capital”However, connecting the control cables that were originally in short supply in demand will induce long-term use, and external environmental reasons will cause a net increase in the resistance of the junction, resulting in a hidden fault source. 2) For the power distribution of the input and output circuits, the actual layout of the facilities should be arranged on the spot as much as possible, and the load of the module should be distributed reasonably.
When the surface load continues indefinitely, it is difficult for the user to identify the fault during maintenance. 3) The schematic diagram of the wooden gas and the number standard of the peripherals are clear. Especially for equipment and systems with many breakthrough points and many loops, the standardized line number marking is helpful to quickly query the fault source of the peripheral path.
4) When there is no way to thoroughly check the line fault point, the current peripheral path is an auction solution for quick troubleshooting due to short-term failure. The purpose of this long-term method is to reduce the years of power outages for birth and breeding as much as possible, and reduce the efficiency of the finished product. . When the cable fault point is detected, the PLC input signal cannot be normal. The electronic distance meter is faulty. Shenzhen Noyafa Electronic Technology Co., Ltd.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.