Author: Noyafa–Cable Tester Manufacturer
The key to maintaining the cable fault detector The cable fault detector device is a comparative inspection instrument, so you need to create a file, and have a person ensure that the file is used, and then the person uses it. Also, when using the cable fault detector, please take care of the key cable fault detector. The cable fault detector device is a comparative inspection instrument, so you need to create a file and ask someone to make sure that the file is used, and then use it by someone else . Also, when using the cable fault detector, please handle it with care and follow the relevant procedures, in order to maintain the cable fault detector with LCD monitor, do not touch the LCD screen with external force.
Instruments with picture tubes should be handled with care. For the probes, probes and other accessories of the cable fault detector, the soil should be cleaned after use to prevent the casing from rusting. For the various test leads of the meter, please place them neatly after use, do not make them into balls, so as not to cause malfunctions with the next pull.
For the maintenance method of the device with built-in power cable failure detector, if the device is powered by dry batteries, the battery should be replaced regularly to prevent battery fluid leakage and damage to the device. If the battery is powered by a rechargeable battery, it should be fully charged before continuing operation when the battery will not be used for an extended period of time. When in storage, the instrument should be charged in about 3 months.
If using lead-acid battery for power supply, do not drain the battery power to prevent the battery from charging, only through the above operation, the maintenance of the cable fault detector equipment can only prolong the service life of the equipment and ensure the accuracy of the equipment detection.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.