Talking about the configuration and management of cable fault tester

2022/04/11
Noyafa Cable Tester

With the development of the times, the use of electricity is also developed. Now we are around, the electricity is unwitten. The electricity is transmitted to all places through the cable. The production of the cable is also more complete, with the development of the times, the use of electricity, now we are around, electricity is all, electricity is transferred to all places, for our lives, work It provides a lot of convenience. The production of the cable is also more complete, used to detect the instrument of the cable——Cable fault tester, types are also increasingly rich, and today, the configuration and management of cable fault testers today.

With the production scale, type and sales of cable manufacturers increase year by year. Since the cable fault is divided into high resistance, low-resistance, disconnection failure and composite fault, the cable fault tester currently sold in the market is generally high and low voltage complete configuration, including more components and accessories, and a set of equipment components. 5-6 pieces, more than 10-11 pieces. As a cable manufacturer, it is necessary to position processing in a timely manner in the factory production process to ensure timely delivery; and also consider the positioning of the customer's field cable to be launched or running the cable burst fault.

Therefore, as a cable manufacturer, when purchasing a cable fault tester, most of the high and low voltage procurement configuration is used, and when the direct buried cable fault in the customer is encountered, the handling and transportation of the entire equipment must have a special cable fault detection vehicle. Show to ensure the quality of transportation. The cable fault tester sold in the market is mainly divided into two categories. One type is a cable fault tester based on echo method: mainly intelligent waveform detection analyzer, wire meter, DC high pressure generator, including consoles and DC dual-use high pressure test transformer, capacitor, gap, fixed-point instrument, etc. The other is a cable fault tester designed and manufactured according to the principle of bridge. The components mainly include fault locker, capacitors, gaps, fixed-point instruments, and the like.

The above two types of detection cable faults are all crude side positioning parts and precise positioning parts of cable faults. Cable fault testers often require frequent transportation or long-distance transportation during production site and customer service site. In order to ensure the normal transportation and use of cable fault testers, the daily maintenance and management of cable fault testers is particularly important.

At the same time, the actual use frequency of the cable fault tester is not high. Therefore, the probability of faults in the transportation process is not very high. The optical cable fault detector is a precise valuable device. In order to ensure the integrity of equipment actual use, actual use of cable fault tester must perform daily maintenance and management in production of cable manufacturers who purchase and use cable fault testers. The critical moment of cable failure with customers fully exerts its role to ensure timely delivery of the product and the rapid resolution of the customer's field cable fault.

The daily maintenance management of the cable fault tester is suggested that the cable fault tester must accept professional training to ensure the safety use of the equipment, preventing equipment from being damaged and electric shock during use. Establish a cable fault tester to use the equipment desk, the use and management of the cable fault tester must specify a special person-franchise, and there is a proper fixed place for storage. Each time you use a cable fault tester, you must strict inspection and recording of the number, integrity, user, usage time, etc. of the cable fault tester.

Use the loan to archive the equipment. After returning to the factory or workshop with a cable fault tester, the number of points must be performed. The number of points should include the number of devices and the number of all parts, and check the integrity of the device before acceptance. If the device has faults and accessories Lost, it should be handled in time, and pursue its corresponding economic losses, ensuring that the equipment is intact before use and is signed by the user and manager.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
English
Magyar
Ελληνικά
한국어
Türkçe
русский
italiano
Español
Português
Polski
français
Deutsch
日本語
Nederlands
Tiếng Việt
ภาษาไทย
Latin
العربية
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
norsk
Chicheŵa
ਪੰਜਾਬੀ
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
Pilipino
Українська
اردو
O'zbek
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English