NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Language
NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Author: Noyafa–CCTV Tester
Main technical indicators of cable identification instrument The cable identification instrument consists of three parts: a signal generator, a receiving identification clamp and an indicator meter. When the receiving identification clamp signal detector is used, the signals detected on other cables are much smaller and in the opposite direction. The main technical indicators of the indicating amplitude cable identification instrument The cable identification instrument consists of three parts: a signal generator, a receiving identification clamp and an indicator meter. When the receiving identification clamp signal detector is used, the signals detected on other cables are much smaller and in opposite directions. By indicating the magnitude and direction of the power meter, it is easy to determine the cable under test. Let's take a look at its main technical indicators. 1. The detection route and the farthest fault location distance: 3km for cables with a wire diameter less than 0.5, and 20 km for other cables.
1. Accurately fixed fault insulation resistance value: 0-50MΩ. 3. Positioning test accuracy:≤±10cm4, detection cable depth:≤3m hopes that the above introduction about the cable identification instrument can bring you some help. Thank you for reading. If you have any needs, please contact us.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.