Author: Noyafa–POE Tester
Live Cable Identification Instrument Introduction to Basic Operation Live Cable Identification Instrument Manufacturer Live Cable Identification Instrument is a special instrument developed according to the needs of the power industry. The cable identification instrument is used to identify the basic operation of the live cable identification instrument in the erection, migration, maintenance and fault handling of the power cable. The live cable identification instrument is a special instrument developed according to the needs of the power industry. The cable identification instrument is used to identify a specific cable to be found in a bundle of cables in the erection, migration, maintenance and troubleshooting of power cables; it has the advantages of accurate cable identification (double identification of direction and amplitude), fast, simple operation, and application. Wide range and so on.
It is a new technical instrument among similar instruments in China. Live cable identification instrument manufacturer The cable identification instrument is composed of three parts: a signal generator, a receiving identification clamp and an indicator meter. When the receiving identification clamp signal detector is used, the signals detected on other cables are much smaller and in the opposite direction, which is indicated by the electric meter. Amplitude and direction, it is easy to determine the cable under test. Shenzhen Noyafa, the manufacturer of live cable identification instrument, will introduce you to the operation introduction of the live cable identification instrument: Insert the red and black wiring plugs of the transmitting caliper A into the two red and black binding posts corresponding to the transmitting source, and put the transmitting caliper A on the identified on the cable.
The arrow on launch caliper A points to the cable terminal. On the identified cable two meters away from the transmitting caliper, clamp the receiving caliper B on the cable, and the arrow on the caliper must point to the cable terminal. Then check the current direction and test connection direction.
At the identification point, use the receiving caliper B to identify each cable. When identifying, make sure that the arrow on the receiving caliper always points to the terminal direction of the cable, and test each cable one by one. On the identified cable, the pointer of the ammeter head of the receiver must be deflected to the right. At the same time, the sound and light alarm prompts that Shenzhen Noyafa is a source enterprise specializing in the production of power testing equipment. The company has won the market and customers with good credit and high-quality products. Good reviews.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.