Xiaobian introduced a lot of related content about the cable recognition in the previous article, including its use, development history, and precautions. Xiaobian wants to give you a technical indicator and technical characteristics of the scientific cable recognizers today. In this regard, Xiaobian introduced a lot of related content about cable recognition, including its use, development history, and precautions.
Xiaobian wants to give you a technical indicator and technical characteristics of the scientific cable recognizers today. Friends interested in this area can refer to this article. Come with Xiaobian.
A target cable is accurately identified from a bundle cable, which is a technical problem that the power cable engineer and cable work is often encountered. This sometimes not only professional cable recognition equipment, but also the experience of staff. The purpose of the cable recognizer is to avoid the serious accidents caused by mistakes. The cable identification requires the professionals to start from both ends of the cable, and must ensure that the double number of cable equipment is accurate.
Regardless of the memory of the staff, there is no replacement of professional instruments. The cable recognizer is a dedicated instrument developed by Noyafa according to the special needs of cable applications, and is used to discriminate the power-down cable to be identified from a bundle cable in the management, setting, migration, maintenance, and fault processing. For cable repair, cable recognizers are a very familiar instrument. It has less than using this product in the installation and maintenance of the power cable. The main reason is to help us provide accurate measurement data.
Noyafa produced cable recognizers use the latest system with high-speed data acquisition and advanced data processing capabilities, which greatly improves the function of the instrument and test accuracy, can test cable path, depth, and radio wave speed, appoinboard length, etc. And can establish cable files for daily maintenance management. Accurate data can help us quickly position in maintenance, reduce the failure repair of the cable identifier for the power cable due to positioning blur and error delays, can say that the use of irreplaceable functions can be used. The cable identifier consists of signal generator and reception identification clamp and instruction table three, and the signal detected on the other cables when receiving the clamp signal detector, and the inverse direction is contrary to the direction, and it is very It is easy to determine the measured cable.
Take a look at its main technical indicators. 1. Detecting routing and flexible vertical positioning distance: 3km less than 0.5 cable is 3km, and other cables can reach 20 km. 2. Fault insulation resistance value of accurate points: 0-50mΩ.
3, positioning test accuracy:≤±10cm. 4, detect the depth of the cable:≤3M technical features: 1, a complete set of cable recognizers transmitter, and the receiver is powered by battery, thoroughly got rid of the dependence on 220V electricity, more favorable in the wild work. 2. Cable identification The receiving coupling tongs uses a flexible clamp, more for cable intensive and heavy cables.
3. Use a large screen color LCD on the display interface, voice prompt, improve the efficiency in cable recognition, simple and easy to operate. The above is the technical indicators and related contents of the cable recognizers, I hope to help people in need.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.