NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Language
NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Author: Noyafa–CCTV Tester
Instrument Inspection of Pipeline Detector Pipeline detector is an intelligent instrument, which can quickly and accurately detect the location and size of the damaged point of the anti-corrosion layer of the underground pipeline without damaging the ground covering. It is widely used in various industries. Then, the pipeline detector is an intelligent instrument, which can quickly and accurately detect the location and size of the damage point of the anti-corrosion layer of the underground pipeline without damaging the ground covering, and is widely used. in various industries. So, do you know how to check and repair when the pipeline detector fails? Let me explain it to you in detail below.
When there is a problem with the pipeline detector, it can be checked from the following aspects: 1. Check the transmitter. Turn on the transmitter and observe the lighting condition of the battery power indicator in the display. If the battery voltage indication is lower than 11V, it needs to be fully charged before use. 2. Receiver inspection.
Press the power button to check the battery level. If the battery is fully charged, all five solid lines of the battery symbol will be displayed on the display. When only one solid line of the battery symbol is lit, the battery symbol will flash, indicating that the battery is insufficient and needs to be fully charged before use. 3. Deep functional inspection.
Choose an area without metal structures and other pipelines to be probed, place an insulated cable or wire greater than 20 meters on the ground, connect the far end to a ground rod or directly ground, and connect the near end to the red wire of the output line, the black wire wire to ground, and plug the output wire into the transmitter's output jack. 4. Refer to the volume setting. The set value is permanently saved. If you need to reset it, you need to press and hold the volume key to turn on the power and enter the setting state to complete the setting of the new reference volume.
I hope that you will not be confused when you encounter problems about pipeline detectors in the future. If you need it, please contact Shenzhen Noyafa Co., Ltd.! We produce high-quality pipeline detectors, please rest assured to buy! If you have any after-sales questions, please feel free to contact us! .
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.