Author: Noyafa–POE Tester
How to use the cable identification instrument, how to judge whether the cable is live, the technical indicators of the live cable identification instrument? In general, it is difficult to find all technical indicators. We have Live Cable Identifier from Shenzhen Noyafa which should be useful to you: 1. How does the clamp use the cable identification instrument, and how to judge whether the cable is live or not? In general, it is difficult to find all technical indicators.
We have live cable identifier from Shenzhen Noyafa which should be useful to you: 1. Jaw knowledge:≥110mm; inner diameter when closed≥110mm2. Power: 1.5KVA (intermittent momentary)3.
Identification method: judge according to the swing direction of the needle 4. Weight: 3.8kg5, Dimensions: 320×300×180mm3 does not allow the use of passive cable identifiers to identify whether running cables are live or not. Cable identifiers are also known as cable identifiers and cable identifiers. It is mainly used for accurate identification of multiple cables on site, to overcome major power outages or personal safety accidents caused by trial cutting errors or mis-sawed cables, and greatly improve construction and maintenance efficiency.
It is an upgraded product of ordinary cable identification instrument. This product can be used for both AC and DC, and it is more convenient to use on site. The characteristics are as follows: 1.
Accurately identify 2. Large identification claws are suitable for various cables3. Operation is extremely simple4.
Clear visual appearance5. Main and auxiliary parts are light, beautiful and feel good6. The whole machine is reliable, not afraid of short circuit 7.
Power output frequency adjustable 8. The receiver sensitivity is adjustable How to use the cable identification instrument, how to judge whether the cable is live or not? The pipe detector and the cable identifier are the same? The pipe detector and the cable identifier are different? The underground pipeline detector can quickly and accurately detect underground pipes and metal pipes , the position, direction, depth of cables, etc., as well as the position and size of the damage point of the steel pipe anti-corrosion coating, without damage. It is one of the necessary instruments for water company, gas company, railway communication, industrial and mining, infrastructure unit transformation, maintenance, and underground pipeline survey.
Underground pipeline detectors are basically divided into two categories: pipeline detectors using the principle of electromagnetic induction and pipeline radars using electromagnetic wave detection. The selection of underground pipeline detectors should be based on the actual situation, considering practical factors, and then make a selection. Underground pipeline detector.
The cable identification instrument is used to identify a specific cable to be found in a bundle of cables in the erection, migration, maintenance and troubleshooting of power cables; it has the characteristics of accurate, fast, simple operation and wide application range for cable construction and cable identification. An indispensable testing instrument in maintenance. The single-chip microcomputer technology is used to encode and power the transmitted signal of the transmitter of the live/non-live cable identification instrument, and the large caliper is driven to couple the signal to the live cable. The single-chip microcomputer in the receiver decodes and identifies the received phase-encoded signal.
The target cable is identified from a large bundle of other cables based on the uniqueness of its signal phase characteristics. It is a lightweight, compact, lithium battery powered portable instrument. Suitable for all kinds of high and low voltage power cables.
How to use the cable identifier and how to judge whether the cable is live Shenzhen Noyafa Electronic Technology Co., Ltd.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.