Author: Noyafa–CCTV Tester
How to avoid failure of the cable fault detector while in use? In the process of cable fault repair, the use of the cable fault detector is inseparable, and once the cable fault detector fails during use, it may cause us to receive more information on how to avoid the use of the cable fault detector. malfunction? In the process of cable fault repair, the use of the cable fault detector is inseparable, and once the cable fault detector fails during use, it may cause us to receive more losses. Today we will tell you how to avoid failures during the use of the cable fault detector. 1. When using the cable fault detector to detect the cable, keep the cable in a power-off state because the cable fault detector detects the faulty cable. Generally, the cable fault detector has its own battery, and the cable fault detector is formed by its own power generation. Signals are used to detect cable faults, but if the cable is still energized, it may affect the use of the cable fault detector, or even worse, make the cable fault detector fail.
2. Use the cable fault detector in the correct way of using the cable fault detector. When using the cable fault detector, we must use the cable fault detector in the correct way of using the cable fault detector, because the cable is used in the correct way. The fault detector will greatly reduce the probability of failure of the cable fault detector, and has a very good guarantee for the accuracy and reliability of the cable fault detector. 3. Distinguish the faulty cable fault detector. The cable fault detector has been used for a long time, and large and small faults will inevitably occur. When it is found that the cable fault detector is used, there is a problem with the accuracy or the cable fault detector. If damage occurs in some important places, it is necessary to distinguish the cable fault detector in time, and then repair it.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.