Author: Noyafa–Cable Length Tester
Bridge fault tester price High-voltage bridge fault tester using steps demo. 3. Press the up, down, left, and right keys, select R-Q in the parameter column of the right test disk, select 1kHz frequency, 1V level, display direct reading, automatic range, slow speed, clear open circuit 4. The test fixture contacts the pin of the resistor to be tested , to ensure good contact between the test fixture and the resistor pins 5. The data displayed on display panel a is the actual resistance value of the current resistance under test, and the data displayed on display panel B is the loss value of the current resistance under test 6 . The operation steps for testing inductance and capacitance are the same as in 7. above. During the test, the human body cannot touch the metal part of the test fixture, otherwise the test data will be inaccurate 8. After the test, turn off the power and cover the instrument with a dust-proof cloth Shenzhen Noyafa Electronic Technology Co., Ltd.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.