NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Language
NOYAFA Electronic specializing in testing instruments and cable testers for 16 years
Author: Noyafa–Cable Locator Suppliers
Power Cable Fault Locator Cable Fault Tester Locating Long Cable Faults Power Cable Fault Locator The use of long high voltage cables has grown significantly over the past two decades, many of which have been installed and buried underwater. This has led to a need for new technologies that can test these cables efficiently and safely. The common methods of cable fault testers (also called buried wire fault detectors) and their associated skills have been known for many years, but recently there has been a strong drive for further development.
These include: The need to simplify the use of cable fault tester equipment Provide operators with better coaching skills through the cable fault tester process The fault tester process stores more energy in the cable. It is necessary to manage this energy safely. The physical properties of time domain reflectometry (TDR) meant that the methods and skills of the time were limited when working with long cables.
TDR skills need to be optimized to minimize these constraints. When working on high-voltage communication equipment with functions such as cross-connection, it is necessary to be able to adjust the filtering, triggering and bandwidth of TDR signal processing accordingly. Implement high-power technology for high-voltage cable testing and diagnostics, while ensuring that the equipment used for testing is easy to transport. . These considerations reflect the most common requests received from cable fault tester equipment users.
In addition, consideration was given to whether the feeder planning could be more cost-effective, in particular whether access to the junction box was required for protection or whether it could be buried and made inaccessible. Looking for an easy way to use existing cable fault locator test methods and equipment for simple cable fault location without TDR capability. The primary reason for this was the desire to reduce setup time when switching between different test power sources and modes of operation, while maintaining operator safety.
The preferred method is to produce a single unit that supports multiple cable fault tester skills. These comments resulted in the development of a novel high-power cable fault location solution that facilitates rapid repair and protection. Cable fault tester locates long cable faults Power cable fault locator Shenzhen Noyafa Electronic Technology Co., Ltd.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.