Author: Noyafa–Cable Length Tester
With the development of technology and the needs of production, the functions of cable fault testers are becoming more and more comprehensive. In the past, a single signal transceiver could not meet the requirements of the cable fault detector. With automatic adjustment, audio, self-check and other functions, it is more convenient to use.
1. Automatic adjustment of receiving gain: Automatically adjust the receiving gain to keep the receiving in an optimized state and avoid tedious manual adjustment2. Sound function: The receiver directly reflects the signal size measured by the cable fault tester through sound changes3.
Pipeline status detection: When the transmitter is in injection mode, it first detects the insulation resistance and residual voltage of the pipe, and then applies the signal to the target pipe. The transmitter will automatically exit this mode when the insulation resistance on the pipe is small (close to a short to ground). When the residual voltage is large, the transmitter will issue an alarm.
The operator should immediately stop the loading signal and turn off the transmitter. 4. Battery power detection: real-time detection of battery power, when the power is low to the protection value, it will issue an alarm and automatically shut down. The cable fault detector adopts advanced signal processing technology, and a variety of signal transmission methods meet our various needs. Accessibility features are optimized to simplify operations and make work more organized.
Auxiliary function of cable fault tester Cable fault tester manufacturer Shenzhen Noyafa Electronic Technology Co., Ltd.
Copyright © 2022 SHENZHEN NOYAFA ELECTRONIC CO.,LIMITED - www.noyafa.net All Rights Reserved.